Hello community.
I’m new to dynv6 and congrats on this nice service 
I would like some guidance please on how to configure dynv6 on Oxygen xDSL Modem/Router.
This is what the interface looks like
I filled in as:
- Hostname = Hostname
- Password = The token I see under the instructions tab of the zone in dynv6.com interface (30 alphanumeric characters)
Result: The xDSL Modem Router says that the update was successful but the IP has not changed under Status tab in dynv6.com for that zone.
Result screen on the Modem/Router
Sorry, new user can’s post second image, so here is a copy/paste instead:
IPv4
Last Update: Thu Apr 1 12:46:44 2021
Status: Successful update
IP Address: x.x.x.x
IPv6
Last Update: Thu Apr 1 12:46:44 2021
Status: Successful update
IP Address: x:x:x:x:x:x:x:x
Interesting thing to note is that in every other combination I’ve tried (like filling in the Token field with the 30 characters long token, etc) result in the same successful message with the same timestamp!
Has anyone succeeded in configuring dynv6.com on this device? Any advice would be appreciated. Thanks!